der netgear ist billig (30EUR) und man kann die integrierte minipci karte fuer 802.11bg durch eine minipci karte fuer 802.11abg ersetzen (~35EUR). ziel ist einen billigen 5ghz node zusammenzustellen.
hab grad die AR5213A karte im netgear wgt634u durch eine AR5006XS (AR5414) ersetzt.
die karte scheint vom treiber erkannt zu werden:
Code: Alles auswählen
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413, REGOPS_FUNC)
ath_rate_sample: 1.2 (0.9.2.1)
ath_pci: 0.9.4.5 (0.9.2.1)
ath_pci: switching rfkill capability off
wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AES AES_CCM TKIP
wifi0: mac 10.5 phy 6.1 radio 6.3
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
wifi0: Atheros 5212: mem=0x40000000, irq=2
Code: Alles auswählen
ath0 IEEE 802.11a ESSID:"OpenWrt" Nickname:""
Mode:Master Frequency:5.18 GHz Access Point: ...
Bit Rate:0 kb/s Tx-Power:15 dBm Sensitivity=0/3
Retry:off RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=0/94 Signal level=-95 dBm Noise level=-95 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0